MSM Unify
Kongu Engineering College logo

Kongu Engineering College (KEC) Courses 2027

Erode

private collegeEstd. 1984
Accreditations
NAAC A++ — National Assessment and Accreditation CouncilNBA — National Board of Accreditation

Kongu Engineering College (KEC) Courses 2027

KEC courses at Kongu Engineering College (KEC), Perundurai, Erode, number 20: 14 UG, 4 M.E. or M.Tech, 1 MBA and 1 MCA. The college is autonomous and affiliated to Anna University, Chennai. These Kongu Engineering College courses are for 2027 entry. The gives data for 2025-26, year unconfirmed.

KEC courses 2027 run 4 years at UG level and 2 years at PG level. B.E. and B.Tech entry is through the TNEA route. The tabs below split KEC UG courses from KEC PG courses.

The list follows the AICTE format of the disclosure. The 20 KEC courses counted here are the ones in the disclosure's list; the website's extra names are not counted. The college holds NAAC A++, valid until March 2027. The fee table prints the Accredited and Non-Accredited bands under an "NBA Status" heading but does not name the branches in each band. The disclosure lists NBA accreditation branch by branch with validity dates; check it for your branch. This page makes no course-level NBA claim.

How many courses does Kongu Engineering College offer?

KEC courses total 20 in the disclosure list (2025-26, year unconfirmed). That is 14 UG, 4 M.E. or M.Tech, 1 MBA and 1 MCA (Source: ).

Which courses have the largest intake?

B.E. Computer Science and Engineering has the largest intake among KEC courses, at 360 seats (2025-26, year unconfirmed). B.E. Electronics and Communication comes next at 240. B.Tech Information Technology and B.Tech Artificial Intelligence and Data Science have 180 seats each.

The college does not publish applicant counts by branch for KEC courses, but its disclosure lists branch-wise TNEA cut-off marks (2025-26, year unconfirmed).

Who awards the degree?

Degrees from KEC courses are awarded under affiliation to Anna University, Chennai. Kongu Engineering College is a private, self-financed, autonomous institution.

Showing 1–3 of 3 programmes

BE/BTech

14 Courses4 years

Exams Accepted

—

Total Fees

₹2 L - 2.2 L

Compare

MBA

1 Course2 years

Exams Accepted

—

Total Fees

₹2 L

Compare

MCA

1 Course2 years

Exams Accepted

—

Total Fees

₹2 L

Compare

Kongu Engineering College (KEC) Courses List 2027

This KEC courses list shows all 20 courses with duration and sanctioned intake from the disclosure (course list and section 16), (2025-26, year unconfirmed). Intake is shown only where the college's own tables agree.

CourseDurationIntake (2025-26)
B.E. Civil Engineering4 years60
B.E. Mechanical Engineering4 yearsNot confirmed
B.E. Mechatronics Engineering4 years120
B.E. Automobile Engineering4 yearsNot confirmed
B.E. Electrical and Electronics Engineering4 years120
B.E. Electronics and Instrumentation Engineering4 years120
B.E. Electronics and Communication Engineering4 years240
B.E. Computer Science and Engineering4 years360
B.E. Computer Science and Design4 years120
B.Tech Information Technology4 years180
B.Tech Chemical Engineering4 years60
B.Tech Food Technology4 years60
B.Tech Artificial Intelligence and Data Science4 years180
B.Tech Artificial Intelligence and Machine Learning4 years60

Mechanical and Automobile show Not confirmed because the college's own tables give two different intakes for each (120 and 60; 60 and 30).

How are seats spread across KEC courses?

Computing courses hold most seats among KEC UG courses. By own arithmetic from the disclosure, the 5 computing courses hold 900 of the 1,680 UG seats (2025-26, year unconfirmed) where the tables agree (53.6%). With Electronics and Communication, the share is 1,140 seats (67.9%). Those 5 are B.E. Computer Science and Engineering, B.E. Computer Science and Design, B.Tech Information Technology, B.Tech Artificial Intelligence and Data Science and B.Tech Artificial Intelligence and Machine Learning.

The three courses started in 2021 hold 360 seats, equal to B.E. Computer Science and Engineering alone. Among KEC PG courses, the 4 M.E. and M.Tech courses hold 48 seats against 240 in MBA and MCA (calculated from the disclosure).

Why do the college's UG seat totals differ?

The college's own tables give three UG totals for KEC courses: 1,860 in the course list, 1,770 in section 16 and 1,810 as the sanctioned-seat figure in the admission table of the disclosure (item 10) (2025-26, year unconfirmed). The 90-seat gap between the first two equals the Mechanical (120 against 60) and Automobile (60 against 30) disagreement. That is why those two intakes stay Not confirmed (own arithmetic).

Which B.E. and B.Tech branches are offered at KEC, Erode?

KEC UG courses cover 9 B.E. branches and 5 B.Tech branches, 14 in all. The B.E. branches are Civil, Mechanical, Mechatronics, Automobile, Electrical and Electronics, Electronics and Instrumentation, Electronics and Communication, Computer Science and Engineering, and Computer Science and Design. The B.Tech branches are Information Technology, Chemical, Food Technology, AI and Data Science, and AI and Machine Learning.

The newest 3 started in 2021: AI and Data Science, AI and Machine Learning, and Computer Science and Design. The oldest are Civil, Mechanical and Electronics and Communication, from 1984. Among the B.E. branches, Computer Science and Engineering is the largest. B.Tech Information Technology and B.Tech Artificial Intelligence and Data Science are the largest B.Tech courses, at 180 seats each.

Which MBA and MCA courses does Kongu Engineering College offer?

KEC PG courses include 1 MBA and 1 MCA. Each runs 2 years and has 120 seats (2025-26, year unconfirmed). The college website names Finance, Marketing, HR and Operations for the MBA, with no seat split by specialisation. The MBA started in 1994 and the MCA in 1993.

Does Kongu Engineering College offer M.E. or M.Tech courses?

Yes, 4 courses. They are KEC PG courses: M.E. Computer Science and Engineering, M.E. VLSI Design, M.E. Structural Engineering and M.Tech Food Technology. The M.E. specialisations are Computer Science and Engineering, VLSI Design and Structural Engineering; M.Tech Food Technology is not an M.E. Intakes are small, between 6 and 18 seats (2025-26, year unconfirmed).

M.E. Structural Engineering has 12 seats but admitted 0 students in both 2025-26 and 2024-25, year unconfirmed (Source: , section 16).

Does Kongu Engineering College offer B.Sc, integrated M.Sc or Ph.D?

The college's admission page lists B.Sc Computer Systems and Design, B.Sc Information Systems, B.Sc Software Systems, a 5-year integrated M.Sc Software Systems and a Ph.D course. They are not in the AICTE-format course list of the disclosure, so this page gives them no intake or fees. The NIRF 2025 data reports part-time Ph.D scholars. Ask the college admission office before you plan around any of them. The college's admission page also lists B.Arch Architecture; the disclosure gives no intake or fee for it or for the applied-science courses above, so none of them is counted in the 20.

Showing 1–5 of 5 courses

Bachelor of Engineering (B.E.) in Automobile Engineering

Degree

BE/BTech

Four-year full-time B.E. programme in Automobile Engineering at Kongu Engineering College (autonomous, Anna University affiliated), admitted via TNEA/management quota.

Total fees
₹2.2 L
Duration
4 years
Level
UG
Compare

Bachelor of Engineering (B.E.) in Civil Engineering

DegreeCivil Engineering

BE/BTech

Four-year full-time B.E. programme in Civil Engineering at Kongu Engineering College (autonomous, Anna University affiliated), admitted via TNEA/management quota.

Total fees
₹2.2 L
Duration
4 years
Level
UG
Compare

Bachelor of Engineering (B.E.) in Computer Science and Design

Degree

BE/BTech

Four-year full-time B.E. programme in Computer Science and Design at Kongu Engineering College (autonomous, Anna University affiliated), admitted via TNEA/management quota.

Total fees
₹2 L
Duration
4 years
Level
UG
Compare

Bachelor of Engineering (B.E.) in Computer Science and Engineering

DegreeComputer Science Engineering

BE/BTech

Four-year full-time B.E. programme in Computer Science and Engineering at Kongu Engineering College (autonomous, Anna University affiliated), admitted via TNEA/management quota.

Total fees
₹2.2 L
Duration
4 years
Level
UG
Compare

Bachelor of Engineering (B.E.) in Electrical and Electronics Engineering

DegreeElectrical Engineering

BE/BTech

Four-year full-time B.E. programme in Electrical and Electronics Engineering at Kongu Engineering College (autonomous, Anna University affiliated), admitted via TNEA/management quota.

Total fees
₹2.2 L
Duration
4 years
Level
UG
Compare

Kongu Engineering College (KEC) Courses Eligibility Criteria

KEC courses eligibility below is as stated on the college website. The Mandatory Disclosure does not give a full prospectus. Confirm the exact marks and category rules with the college before you apply.

CourseEligibilityEntry route
B.E. and B.TechPass in Class 12 (HSC) with Physics, Chemistry and MathematicsTNEA counselling
M.E. and M.TechBachelor's degree in Engineering or TechnologyNot published
MBA and MCAAny undergraduate degreeNot published

What is the eligibility for B.E. and B.Tech at Kongu Engineering College?

KEC UG courses need a pass in Class 12 with Physics, Chemistry and Mathematics. The college's TNEA counselling code is 2711. Seats are filled as per Tamil Nadu Government norms. Management-quota seats go through the Association of Management of Coimbatore Anna University Affiliated Colleges.

What is the eligibility for MBA and MCA at Kongu Engineering College?

Any undergraduate degree is enough for these KEC courses, as stated on the college website. No minimum mark is published. The Mandatory Disclosure and website name no PG entrance test for any of the 6 PG courses, so confirm the selection route with the admission office.

Does Kongu Engineering College take lateral entry for diploma holders?

No lateral-entry route is published for 2027. The college's NIRF 2025 data shows UG lateral-entry admissions (306 students in 2021-22, per the NIRF 2025 data submission), but current lateral-entry seats, eligibility and process are not published. Call the admission office on +91 94430 20583 or write to registrar@kongu.ac.in.

Kongu Engineering College (KEC) Courses Fees

KEC courses fees are published per year in the college disclosure, not as whole-course totals. UG regular tuition is Rs 50,000 to Rs 55,000 per year (2025-26, year unconfirmed), in the two fee-table bands the college labels Accredited and Non-Accredited. The fee table prints these under an "NBA Status" heading but does not name the branches in each band. The disclosure lists NBA accreditation branch by branch with validity dates; check it for your branch. This page makes no course-level NBA claim. The Fees page has the full breakup, quota fees and the four-year or two-year totals. The M.E. and M.Tech fee is not published in a usable form.

Kongu Engineering College (KEC) Courses Duration

KEC courses duration is fixed by level: KEC UG courses run 4 years and KEC PG courses run 2 years. Course duration and intake for courses in KEC are in the KEC courses list above. None of the 20 listed courses is published as online, distance or part-time; the NIRF 2025 data reports part-time Ph.D scholars.

LevelCoursesDuration
UG (B.E. and B.Tech)144 years
PG (M.E. and M.Tech)42 years
MBA and MCA22 years

Kongu Engineering College (KEC) Courses FAQs

For admission steps, see the official admission page: Kongu Engineering College admission. The source for the course list and intake is the college's .

Next: KEC fees page and Kongu Engineering College profile.

Commonly asked questions

Answers to what readers ask most often.

Q: What should I check before choosing a KEC course?

Check the branch, its cut-off marks and its sanctioned seats. First, the branch you want and its intake in the disclosure. Second, the branch-wise TNEA cut-off marks (2025-26, year unconfirmed) in the same disclosure. Third, the sanctioned seats, because small courses fill with few students.

Q: What are the seat limits in KEC courses?

Seats run from 6 in M.E. VLSI Design to 360 in B.E. Computer Science and Engineering. These are sanctioned intakes from the disclosure (2025-26, year unconfirmed). The two Not confirmed courses have no figure until the college clears its own tables.

Q: How do B.E. and B.Tech compare at KEC?

They are the same in duration, entry and awarding university. For KEC courses, they are the same in duration (4 years), entry (TNEA counselling) and awarding university (Anna University, Chennai). The difference is the branch name. KEC lists 9 B.E. and 5 B.Tech courses, so pick by branch, not by the B.E. or B.Tech label.

Q: Where can I see TNEA cut-off marks for KEC courses?

The Mandatory Disclosure lists branch-wise TNEA cut-off marks (2025-26, year unconfirmed). Use them as a past guide for KEC courses 2027, not as a promise for the coming round of TNEA counselling.

Content authored by:

Atul Harsha

Updated on

Headline: EdTech Leader | AI & SEO Strategist | Computer Science Engineer: Atul leads SEO, content, and data at MSM Unify India. He plans the organic content strategy and also owns the structured data that feeds it. He works with a team of product managers, engineers, QA, designers, writers, and SEO specialists. Together they create guides for Indian students and parents on colleges, entrance exams, and studying abroad. Atul has built a step-by-step content process that uses AI tools with a human in the loop. Every page goes through several stages. It starts with research, where each fact is checked on the official source. A second, independent source is then used to confirm that the fact is correct and the latest. Third-party sites are used only to spot differences and are never treated as a source. Before writing, the team studies what students actually search for and what the top results leave out. This study covers Google, Bing, DuckDuckGo, ChatGPT, and Perplexity, including AI answers and “People also ask” questions. Pages written by Atul are in plain English that can be understood in one read, and they open with the question the reader is most likely to have. Before a page goes live, every number, name, date, and fact is checked again against its official source. Finally, an editor reads and humanises every page, however good the draft is. Atul believes that advice on education should be simple, honest, and based on official facts. Fees and figures should come with their source. A student should be told clearly when a college is not the right fit.

Add MSM Unify as apreferred source